| Applikation | Unterstützte Geräte | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PiPico BCU Connector |
REG1 Basismodul |
REG1 Basismodul V0 |
REG1 Basismodul LAN+TP |
REG1 Basismodul IP |
REG1 LAN Gateway |
UP1 8xSensor |
UP1 Präsenzmelder+ |
UP1 Taster |
UP1 UART Gateway |
REG2 PiPico V1 |
OpenKNXiao Mini RP2040 V1 |
Adafruit ESP32 Feather V2 |
Adafruit ESP32 Feather V2 (TP) |
AZDelivery ESP32 Board Dev Kit C V4 (TP) |
Spezielle Geräte: | Sonstige Geräte |
|
| OAM-RaumController OpenKNX Applikation mit allen notwendigen Modulen, um einen Raum in einem Haus zu automatisieren |
◼ | ◼ | ◼ | ◼ | ◼ | ◼ | ◼ | ◼ | 8 | ||||||||
| OAM-PresenceModule Implements a presence detection fimware for KNX Bus |
◼ | ◼ | ◼ | 5 | |||||||||||||
| OAM-SensorModule Allows sending sensor values to the KNX Bus |
◼ | ◼ | ◼ | ◼ | ◼ | 6 | |||||||||||
| OAM-OneWireModule Allows interaction of OneWire devices with the KNX Bus |
|||||||||||||||||
| OAM-WeatherWN90LP OpenKNX Applikation Wetterstation WN90LP |
◼ REG1 RS485 Gateway, ◼ UP1 RS485 Gateway | ||||||||||||||||
| OAM-TouchRound OpenKNX Firmware und Anwendung zur Einbindung von runden Touch-Displays. |
|||||||||||||||||
| OAM-HeatingActuator | |||||||||||||||||
| OAM-LedDimmer-AB | 7 | ||||||||||||||||